Guida [Release] Full Windows 10 in Raspberry PI 3

Roronoa Zoro

Utente Emerald
14 Ottobre 2016
739
95
268
525
Ultima modifica:
Ciaoo, in questi giorni è uscito il progetto finito su GitHub di un installer di Windows 10 su raspberry PI 3. Il progetto è sicuro e semplice, hostato interamente su GitHub.

Vi faccio un copia ed incolla della pagina di benvenuto del progetto sul loro GitHub ed in fondo vi metto il LINK ORIGINALE dove potete andare a sbirciare il progetto. Ho anche fatto ed inviato la loro la traduzione interamente in italiano delle pagine di assistenza e presentazione del progetto...vedremo se hanno tempo per implementarle. detto questo vi lascio alla release:

WoA Installer per Raspberry Pi 3
L'applicazione per installare Windows 10 Full nel tuo Raspberry Pi!



Super semplice da usare. No-problemi.
Per piacere leggi attentamente. Tutto quello di cui hai bisogno è scritto qui.

Requisiti per WOA
  • Raspberry Pi 3 Model B (or B+)
  • MicroSD card. Raccomandata con rateo A1.
  • A Windows 10 ARM64 Image (.wim). Per piacere, vai qui this link per scaricarlo.
Requisiti per eseguire l'applicazione
  • Una versione recente di Windows 10 (per piacere, assicurati di utilizzare l'ultima versione, altrimenti non aprire problemi). .NET Framework 4.6.1 (dovrebbe essere incluso nella recente versione di Windows 10)
Informazioni Core Packages
Per piacere, si fa notare che l'installer WoA è solo un tool che ti aiuta nello sviluppo. WoA Installer ha bisogno di alcuni file binaries, AKA i Core Package, per fare il suo lavoro. questi binaries non sono miei sono in bundle e offerti solo per convenienza per renderti la vita più semplice, infatti questo tool è orientato alla semplicità.

Li trovate qui sotto.

Downloads
1. WoA Installer
Scarica l'ultima versione ultima versione

2. Core Package
Scaricalo da qui.

3. Installare i Core Package
Avvia l'installer di WoA e vai sulla sezione Advanced. Clicca su [Import Core Package] e seleziona direttamente il pacchetto. Non decomprimeteli (Non eseguire l'unzip). Dopo quest'importante operazione, sarai in grado di distribuire Windows.

Le donazioni sono ben accette!
Se lo trovi utile, sentiti utile di offrirmi un caffè ☕. Grazie in anticipo!!

Donate ai contributori del progetto
Per piacere, non dimenticatevi the il progetto WOA per Raspberry Pi è supportato da utenti privati e aziende (guarda la sezione dei crediti e riconoscimenti).

Bisogno di aiuto?
Allora visita il sito riguardo i nostri progetti a https://pi64.win, per una soluzione one-stop per tutte le tue domande

Ti raccomandiamo anche di rellegere le FAQ

Crediti e Riconoscimenti
WoA Installer è possibile grazie alla bella community dietro ad esso. Vorrei ringraziare le brillanti menti dietro questa meraviglia tecnica. Se pensi di essere aggiunto alla lista, per piacere, contattami usando l'indirizzo email he trovi nel mio profilo.

  • Andrei Warkentin per il 64-bit Pi UEFI, UEFI Pi (HDMI, USB, SD/MMC) drivers, miglioramento ATF e supporto Windows boot/runtime.
  • MCCI per il loro ottimo contributo per il RaspberryPI WoA Project:
    • per aver portato il loro TrueTask USB stack in Windows 10 ARM64, e concesso un uso non commerciale a questo progetto. (guarda la licenza)
    • per aver finanziato il sito del progetto http://pi64.win e anche il sito del discorso http://discourse.pi64.win
    • Un ringraziamento speciale a Terry Moore per tutto l'ottimo supporto e consilenza, e per aver configurato la presenza online del progetto e la sua infrastruttura.
  • Ard Bisheuvel per l' ATF iniziale e le porte UEFI
  • Googulator per il suo metodo per installare WoA nel RaspberryPI
  • Mario Bălănică per il suo fantastico tool, e per i consigli e supporto :)
    • daveb77
    • thchi12
    • falkor2k15
    • driver1998
    • XperfectTR
    • woachk
    • novaspirit
    • zlockard
  • ...un grazie per aver testato tutti gli ACPI/driver e per le procedure di installazione.
  • Microsoft per il 32-bit IoT firmware.
In oltre un grazie anche a:

E il nostro bellissimo gruppo su Telegram per i loro test e il supporto!

Progetti Relativi
Questi sono altri progetti relativi al Raspberry. I Core Packages vengono da loro. Un Grande grazie!




LINK ORIGINALE PER IL PROGETTO SU GITHUB: https://github.com/WOA-Project/WoA-Installer-Rpi#woa-installer-for-raspberry-pi-3

ciao e grazie per l' attenzione
 
Ciaoo, in questi giorni è uscito il progetto finito su GitHub di un installer di Windows 10 su raspberry PI 3. Il progetto è sicuro e semplice, hostato interamente su GitHub.

Vi faccio un copia ed incolla della pagina di benvenuto del progetto sul loro GitHub ed in fondo vi metto il LINK ORIGINALE dove potete andare a sbirciare il progetto. Ho anche fatto ed inviato la loro la traduzione interamente in italiano delle pagine di assistenza e presentazione del progetto...vedremo se hanno tempo per implementarle. detto questo vi lascio alla release:

WoA Installer for Raspberry Pi 3
The application to install Full Windows 10 into your Raspberry Pi!



Super easy to use. No-hassle.
Please keep reading carefully. All you need is here.

Requirements for WOA
  • Raspberry Pi 3 Model B (or B+)
  • MicroSD card. Recommended with A1 rating.
  • A Windows 10 ARM64 Image (.wim). Please, check this link to get it.
Requirements for running this application
  • A recent version of Windows 10 (please, use the latest to ensure it'll run correctly, don't open issues otherwise)
  • .NET Framework 4.6.1 (should come included in recent versions of Windows 10)
About Core Packages
Please, notice the WoA Installer is only a tool with helps you with the deployment. WoA Installer needs a set of binaries, AKA the Core Package, to do its job. These binaries are not not mine and are bundled and offered just for convenience to make your life easier, since this tool is focused on simplicity.

Find them below.

Downloads
1. WoA Installer
Download the latest version

2. Core Package
Download it from here.

Installing the Core Package
Run WoA Installer and go to the Advanced section. Click on [Import Core Package] and select the package directly. Don't attempt to uncompress it. After the import operation, you will be able to use deploy Windows.

Donations are welcome!
If you find this useful, feel free to buy me a coffee ☕. Thanks in advance!!

Donate to the contributors of this project
Please, don't forget that the RaspberryPi WOA Project is supported by other individuals and companies (see the credits and acknowledgements section).

Need help?
Then visit our projects website at https://pi64.win, the one-stop solution for all your questions

It's also recommended that you read the FAQ

Credits and Acknowledgements
This WoA Installer is possible because the great community behind it. I would like to thank the brilliant minds behind this technical wonder. If you think you should be listed, please, contact me using the e-mail address on my profile.

  • Andrei Warkentin for the 64-bit Pi UEFI, UEFI Pi (HDMI, USB, SD/MMC) drivers, improved ATF and Windows boot/runtime support.
  • MCCI for their great contribution to the RaspberryPI WOA project:
    • for porting their TrueTask USB stack to Windows 10 ARM64, and allowing non-commercial use with this project (see license)
    • for funding the site of the project http://pi64.win and the discourse site http://discourse.pi64.win
    • Special thanks to Terry Moore for all the great support and commitment, and for setting up the online presence for the project and its insfrastructure.
  • Ard Bisheuvel for initial ATF and UEFI ports
  • Googulator for his method to install WoA in the Raspberry Pi
  • Mario Bălănică for his awesome tool, and for tips and support :)
    • daveb77
    • thchi12
    • falkor2k15
    • driver1998
    • XperfectTR
    • woachk
    • novaspirit
    • zlockard
  • ...for everything from ACPI/driver work to installation procedures, testing and so on.
  • Microsoft for the 32-bit IoT firmware.
In addition to:

And our wonderful group at Telegram for their testing and support!

Related projects
These are the related projects. The Core Packages comes from them. Big thanks!



LINK ORIGINALE PER IL PROGETTO SU GITHUB: https://github.com/WOA-Project/WoA-Installer-Rpi#woa-installer-for-raspberry-pi-3

ciao e grazie per l' attenzione
Se hai un pò di tempo fai la traduzione in italiano.
 
  • Mi piace
Reazioni: Roronoa Zoro
ho un immagine gia fatta ... se volete ve l ha uppo da qualche parte... ma vi informo che winzoz sul raspy va abbastanza lento... praticamente solo per il gusto di vederlo partire ...
 
ho un immagine gia fatta ... se volete ve l ha uppo da qualche parte... ma vi informo che winzoz sul raspy va abbastanza lento... praticamente solo per il gusto di vederlo partire ...

Purtroppo Raspberry non è espandibile come hardware e gli sviluppatori hanno fatto del loro meglio. Per l'immagine potresti metterla ad esempio su qualche cloud e mandarmi il link ? Che così lo metto nella descrizione del progetto :)

Grazie